Linksys BEFSR41 - EtherFast Cable/DSL Router Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 78

background image

49

Appendix A: Troubleshooting
Frequently Asked Questions

EtherFast Cable/DSL Router with 4-Port Switch

• If the Router is configured correctly, check your Internet connection (DSL/cable modem, etc.) to see if it is

working correctly. You can remove the Router to verify a direct connection.

• Manually configure the TCP/IP with a DNS address provided by your ISP.
• Make sure that your browser is set to connect directly and that any dial-up is disabled. For Internet

Explorer, click

Tools

,

Internet Options

, and then the

Connection

tab. Make sure that Internet Explorer is

set to

Never dial a connection

. For Netscape Navigator, click

Edit

,

Preferences

,

Advanced

, and

Proxy

.

Make sure that Netscape Navigator is set to

Direct connection to the Internet

.

Frequently Asked Questions

What is the maximum number of IP addresses that the Router will support?

The Router will support up to 253 IP addresses.

Is IPSec Passthrough supported by the Router?

Yes, enable or disable IPSec Passthrough on the Security => VPN Passthrough tab.

Where is the Router installed on the network?

In a typical environment, the Router is installed between the cable/DSL modem and the local area network (LAN).
Plug the Router into the cable/DSL modem’s Ethernet port.

Does the Router support IPX or AppleTalk?

No. TCP/IP is the only protocol standard for the Internet and has become the global standard for communications.
IPX, a NetWare communications protocol used only to route messages from one node to another, and AppleTalk, a
communications protocol used on Apple and Macintosh networks, can be used for LAN to LAN connections, but
those protocols cannot connect from the Internet to the LAN.

What is Network Address Translation and what is it used for?

Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one public address that
is sent out to the Internet. This adds a level of security since the address of a PC connected to the private LAN is
never transmitted on the Internet. Furthermore, NAT allows the Router to be used with low cost Internet accounts,
such as DSL or cable modems, when only one TCP/IP address is provided by the ISP. The user may have many
private addresses behind this single address provided by the ISP.

Does the Router support any operating system other than Windows 98, Millennium, 2000, or XP?

Yes, but Linksys does not, at this time, provide technical support for setup, configuration or troubleshooting of
any non-Windows operating systems.

«
...
53
54
55
56
57
...
»

Содержание BEFSR41 - EtherFast Cable/DSL Router















































































Отзывы:

Нет отзывов

Похожие инструкции для BEFSR41 - EtherFast Cable/DSL Router

Бренд: Hama Страницы: 10

grandMA2 Series

Бренд: MA lighting Страницы: 36

Бренд: PaloAlto Networks Страницы: 3

Бренд: Paradyne Страницы: 1

Azure StorSimple 8100

Бренд: Microsoft Страницы: 12

ADSL 2/2+ Router with USB Port ADE-3410v2

Бренд: Planet Страницы: 62

X-Pedition 2000

Бренд: Enterasys Страницы: 86

Бренд: Stephen Страницы: 102

Бренд: E-Lins Страницы: 9

Бренд: ZyXEL Communications Страницы: 2

Бренд: Zhone Страницы: 28

HFisolator 9730/26-11

Бренд: Stahl Страницы: 2

Network Adapter AC AAP

Бренд: Extron electronics Страницы: 2

TeraBridge 5845

Бренд: Proxim Страницы: 4

Бренд: ActionTec MI424WR Страницы: 3

Бренд: Erbauer Страницы: 36

Бренд: TRENDnet Страницы: 3

Бренд: ASTRO Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды