1-63
User Guide for the Cisco Multicast Manager 2.3.3
OL-7348-01
Chapter 1 Using the Cisco Multicast Manager
Using the Multicast Manager Tool
To draw a graphical tree between two particular routers:
•
FHR—
Select the first hop router that the trace should start under.
•
LHR—
Select the last hop router that the trace should end under.
•
Click
Trace
. The CMM draws a tree of the source and group selected from the router in FHR to the
router in LHR.
View the list of active sources and groups:
•
Group—
Lists all active groups. To draw a multicast tree, click on a group. A new page appears with
the multicast tree in tabular and graphical format. Routers known as RPs to the source router appear
green.
Note
If there is more than one source for the group, click on
Sources
under
Number of Sources
and
select the source you want to draw the tree from.
Figure 1-46
Drawing a Multicast Tree (Baseline)
•
To save the multicast tree as a baseline, enter a name within
Trace File
, and click
Save As
. The
window closes. You can use the saved baseline for tree polling (see the
“Tree Polling” section on
page 1-38
).
Note
You can also save the tree as a .jpeg, .bmp, or .png file by right-clicking on it.
