1-33
User Guide for the Cisco Multicast Manager 2.3.3
OL-7348-01
Chapter 1 Using the Cisco Multicast Manager
Using the Administration Tool
SG Polling—Main
Using the CMM, you can poll sources and groups with high and low thresholds.
You can select the source and group from the list, or you can enter them manually. If there are a lot of
sources and/or groups, you can use the filter option, to ensure you are selecting an S,G that actually
exists in the network. The filter option displays only the sources for a selected group, or only the groups
for a selected source.
Source
Enter or select the IP address of the source to
monitor.
Filter Groups
Filters the output to contain only the relevant
groups.
Group
Enter or select the IP address of the group to
monitor.
Filter Sources
Filters the output to contain only the relevant
sources.
Reset SG Lists
Clears any entries and refreshes the source and
group lists.
Router
Enter the router name.
Delta
Number of RPF failures per sampling period that
trigger a report.
Apply
Applies and saves the changes.
Refresh Cache
Click
Refresh Cache
to refresh the table of
sources and groups.
Fields and Buttons
Description
