Linksys EtherFast Series
10
8. Windows will finish installing the software onto your PC. Click Finish.
9. When asked if you want to restart your PC, remove the Driver Disk and
click Yes. If you are using the Windows CD-ROM, leave it in your PC.
You may need it later.
10. If Windows does not ask you to restart your PC, click the Start button,
choose Shut Down, choose Restart, then click Yes.
The Windows 98 driver installation is complete. Please continue on to the
next section, which will provide instructions for configuring Windows
98’s network protocol. Consult your network administrator for your net-
work configuration information if necessary.
N
No
otte
e:: From this point on, you must provide Windows with a User name and
Password every time you are prompted to do so. Remember to click O
OK
K to
properly log into Windows. If you click C
Ca
an
nc
ce
ell or hit the E
Es
sc
ca
ap
pe
e ((E
ES
SC
C)) key,
you will not log into the network.
LNE100TX v4 test doc.qxd 3/22/00 4:11 PM Page 10
