Linkcom link smile, Руководство пользователя

Страница: 7 / 21

Linkcom France
11 rue du Soleil Levant 92140 CLAMART Copyright © 2011 – Linkcom – All rights reserved
7
3. Smile DoorPhone Service
3.1. Signaling overview
The Smile DoorPhone signaling acoustically stages which are happening during operation. Samples of
acoustical sounds you can play in Smile DoorPhone Config .
Stage Tones
Tone
frequency
Line pick up (OFF HOOK) type 1
– ▄■▄■▀ – 980-1333-1650
Line hang up (ON HOOK) type1
– ▀■▄■▄ – 1650-1333-980
Line pick up (OFF HOOK) type 2
– ▄■▀ –
800-1067-1200-
1333
Line hang up (ON HOOK) type2
– ▀■▄ –
1333-1200-1067-
800
Command confirmation by phone
–– █ ––
800
Alerting (knocking) into call
─┴─┴─
Call ending alert
– ■ – ■ – ■ –
1333
Relay activation signal
─▒▒▒▒▒▒─
Modulovan ý
Programming enter by phone
– ▄■▀ – 980-1067-1180
Programming by phone
–– ▓ – ▓ –––––
Modulovan ý
Parameter confirmation
–– █ ––
800
Programming enter by PC
– ▄■▀ – 980-1067-1180
Line connection (Reset)
– ■ – ▄ – ■ – 1850-1067-1850
Error (generally all incorrects)
– ■ – ■ – ■ – ■ – ■ – ■ –
800
Memory empty (no number
programmed)
– ▄■▄■▄■▄■ –
1300-2100
For the problems identification is very good when you know the tones. It helps you monitor how door
intercom works and where from comes the problem. The signaling might be switch of in a few levels
(
Parameters 61,62,63 and 65 ).
3.2. Visitor at the door
When the visitor finds the desired name and push it, the Smile DoorPhone pick up the line and play the
tone line pick up (when is not switch off by parameter 62 ) and calls the phone number saved under the
button (parameter 1 ). On the Smile DoorPhone speaker you hear ringing tone and the destination
phone ringing.
As soon as the destination phone pick up, you can talk to visitor at the door.
When is electrical lock is connected to the
Smile DoorPhone , you can open the door for visitor by dial
DTMF code on the destination phone.
When the destination phone hang-up the line then the
Smile DoorPhone hangs up after busy tone
detection. When the call duration is longer then setup limit (parameter 52 ) 10 sec before hang up, the
Smile DoorPhone sends a alerting tone of call ending, dial * or # (parameter 42 ) to prolong the call.
The dialed number is dictated by the chosen mode, which is set in the unit (parameter
47 ):
•
Day/Night mode : If the unit is in Day mode, it will always dial the number set in parameter 1,
In Night mode, it will always dial the number set in parameter 2. The mode switchover is set in
parameters 45,46.
•
2 groups numbers mode : On the first press the number set in parameter 1 will be dialed. When
the same button is pushed or 10 seconds after dial busy tone is detected, or setup number of