Linkcom link smile, Руководство пользователя

Страница: 13 / 21

Linkcom France
11 rue du Soleil Levant 92140 CLAMART Copyright © 2011 – Linkcom – All rights reserved
13
Parameter Value Description Default
53 w
Time between button push
(1-9)
2
w
– maximal time [sec] between button push [range 1-9]
relay closing – if time between two next presses is bigger than w time, the code is not evaluated
correctly.
Parameter Value Description Default
54 z On hook time before new call (1-5) 2
z – time [sec] for which the unit will hang up, before repeat dialing (button pressing during call or
dialling, busy tone detection) [range 1-5]
Parameter Value Description Default
55 z Call start time (1-5) 1
z – time [sec] after unit goes on hook before dialing [range 1-5]. This time is different for each PBX, but
most PBXs usually manage to process dialing up to 2 seconds after line on hook.
Parameter Value Description Default
56 hh
Number of rings before hanging up or
group mode switching. (04-99)
12
h – specifies the amount of time spent ringing before the unit hangs up and tries the next number.
Parameter Value Description Default
500 x Middle frequency of tones detector (1-0)
3
(375-475Hz)
501 y
Number of busy tones (2-
0)
4
502 z
Time of permanent tone duration (1-
5)
3 (3s)
x –
middle frequency of tones detector – is suitable when PBX signaling is unusual:
y – minimal number of busy tones necessary for detection [2-0], where 0 means 10 busy tones
z – minimal time of permanent tone duration (for dial tone detection on PBX) [1-5 sec]
Parameter Value Description Default
503 tt
Time of tone duration DTMF (tone) dial
(04-16)
10 (100ms)
504 mm
Time of space duration between DTMF
tone (04-16)
10 (100ms)
505 f Time of Flash duration (1-6) 1 (100ms)
506 p
Time of pause duration / pause between
numbers (1-0)
4 (800ms)