Linkcom France
11 rue du Soleil Levant 92140 CLAMART Copyright © 2011 – Linkcom – All rights reserved
3
1. Basic Description
1. PCB Schematics
1. Connector for USB programming cable
2. Speaker connection
3. Microphone connection
4. DIP switch:
1: Service, when the programming password is forgotten, the incoming call is going directly to
programming mode and you can set new password.
2: Heating, switch ON integrated heating of motherboard to increase resistance against
condensation water.
5. Connector for PBX analog extension port or PSTN line.
6. Ground - connection to ground for static electricity protection
7. Relays connector (
max. 48V / 1,5A
)
8. 12V power supply connector. The power supply is necessary for the relay, the motherboard heating
and cards backlighting.
