Oper
ating instructions
20
Annex
Annex
Technical data/features
Standard:
DECT (Digital Enhanced Cordless
Telecommunications), GAP-compatible
Frequency range:
1880 MHz to 1900 MHz
Transmission output:
10 mW on average
Aerial socket:
SMA socket for external aerial via coaxial
cable (with LINK 2800 DECT/GAP L.Range
only)
Voice transmission:
32 kbit/s ADPCM
Fax mode:
Group 3, V.29 at maximum 9600 bit/s
Modem mode:
Maximum 9600 bit/s
Dialling procedure:
DTMF
Number of cordless handsets:
8
Conformity:
EN60950:2000, TBR 21, ETS 300 444,
ETS 300 659-1/300 778-1, EN301 406;
TBR10
Public exchange connection: Country support conforming to TBR 21
Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Iceland, Ireland, Italy,
Luxemburg, Netherlands, Norway, Poland,
Portugal, Spain, Sweden, Switzerland,
Great Britain
CLIP:
Protocol to ETSI standard, type 1
Flash time:
adjustable up to 2550 ms
Operating temperature:
+10° C to +40° C
Relative humidity:
20% to 75%
Permissible
storage temperature:
-10° C to +60° C
Display unit:
LED for exchange access/registration/
programming
Operating unit:
Button for registration
Dimensions:
120 x 100 x 38 mm (W x H x D)
Weight:
130 g
Mounting location:
Wall mounting indoors
Power supply:
6 V AC / 8 V DC (+/- 15%) (180 mA zero
signal current, maximum 300 mA)
Scope of delivery:
AC adapter 230 V ~ 50 Hz
Connection cable for telephone cable
4
Telephoning
Toggling
During an external call, you can toggle back and forth between that call
and an internal call.
**
+ handset number can be used to start the
internal call, and
**0
can be used to toggle between the two calls.
4.1.2 Outgoing
calls
Lift the receiver and press the handset key on your phone. Dial the
number for the subscriber required.
Outgoing calls with dedicated line seizure
To use one of the specific lines available on your LINK 2800 DECT/GAP,
dial
#1
or
#2
in front of the number of required subscriber. If this
manual dialling is not carried out, the line specified in the default setting
is used automatically (see parameter 12).
Blacklisted numbers
If numbers are included in the excluded area, a busy tone is sounded
after a blacklisted number is dialled (see parameters 40-42).
Provider selection
The provider setting made (see parameter 46), you can deactivate this
by dialling
#60
in front of the number of the required subscriber and
activate by dialling
#61
. This input is effective for the next call.
4.2
Making internal telephone calls
For an internal, call, dial
**
+ handset number.
Hunt group call
For a hunt group call on all registered handsets, dial
**9
.
Содержание LINK 2800 DECT
Страница 1: ...LINK 2800 DECT GAP Mode d emploi Operating instructions F GB...
Страница 26: ...25 24...
