Linkcom LINK 2800 DECT, Руководство по эксплуатации

Страница: 19 / 27

11 3 Programming mode
Oper
ating Instructions
3.2.7 Direct dial-in
Function Parameter Inputs
code
Direct dialling in 21 0 #
Calls to lines 1 and 2 are signalled on the handsets according to the call
assignment.
Direct dialling in 21 1 #
Calls on the lines are accepted by the LINK 2800 DECT/GAP, the caller
hears a signal tone and can trigger signalling on the relevant handset
after direct dialling the DTMF numbers 1…8. If no direct dialling is
detected within 5 seconds, the signalling is carried out according to the
call assignment. If the selected handset does not answer, the signalling
process is continued according to the call assignment.
Factory setting: 0
3.2.8 Call-waiting
Function Parameter Inputs
code
Call waiting 22 0 #
If an external or internal call is present, another external call for that
handset will not be signalled.
Call waiting 22 1 #
If an external or internal call is present, another external call for that
handset will be signalled by a call waiting tone.
Factory setting: 1
10
3 Programming mode
Fax subscribers 14 1…8 1 #
This handset is a LINK BOX GAP 300/5000 with a fax machine or modem
connected. Call-waiting tones are not signalled. With a fax subscriber, any
calls cannot be queried using “pick up”.
Factory setting: 0
3.2.5 De-registering a handset
Function Parameter Mob. no. Inputs
code
De-registering a handset 15 1…8 #
The corresponding handset is no longer registered.
3.2.6 Connection pick-up ( SBCT = S ingle B utton C all T ransfer)
Function Parameter Mob. no. Inputs
code
SBCT 16 1…8 0#
The partner handset that has been assigned is deleted.
SBCT 16 1…8 Partner#
Four pairs with “partner handsets” can be configured. Each handset can
only be part of a specific pair. An active call can be transferred by
pressing the “On” key on the partner handset. This feature functions in
both directions between the partner handsets. It can be used to set up a
call using a handset and subsequently continue the conversation using a
DECT headset. Please bear in mind that a handset with this function is
unable to establish an outgoing call as long a call is being made on the
partner handset.
Default setting 0