10
Setting up ECP Water Circulator
Pump
The ECP Water Circulator Pump (1) supplied
with your LTS120 stage is used to circulate water
at ambient temperature to provide the temperature
gradient needed to make the Peltier heat and cool.
The ECP must be connected to the LTS120. See
the ECP manual for instruction setting up the
ECP.
Connect the tubing to the Inlet and Outlet as
shown.
The tube is pushed directly on to the water Inlet
and Outet connectors.
Note: the ECP must be switched on first and
circulating water before the LTS120 is used.
1
Inlet
Outlet
