18
Liquid Crystal Stage
Only read the following if your stage is a
LTSE120 Liquid Crystal Stage.
The Liquid Crystal System is supplied with a
Liquid Crystal Slide Holder (1) and 5 Liquid
Crystal Cells (5um gap, capillary fill,
ITO coated
and anti parallel aligned).
Assemble the Liquid Crystal Holder (1) to the XY
Assembly as shown on page 6.
Note: make sure the Liquid Cell Holder is the
right way up as shown in the opposite picture.
Connect the two wires from the Liquid Cell Hold-
er to the Internal Electrical Conatcts as shown on
page 15.
Using the Liquid Crystal Cell
Fill the Liquid Crystal Cell (2) with your sample.
Lift the Liquid Cell Holder and slide in the Liquid
Crystal Cell.
Make sure the Liquid Crystal Cell is seated cor-
rectly as seen in the opposite diagram.
1
2
2
