Linhai ATV 500-D T3 EFI, Руководство по обслуживанию

Страница: 49 / 291

CHAPTER 3 ENGINE
LH500ATV-D T3 EFI SERVICE MANUA 19.0
CHAPTER 3 ENGINE PAGE. 3- 16
GENERAL PRECAUTIONS
Warning ! Proper service and repair procedures are important for the safety of
operator and the safety and reliability of the vehicle.
When two or more persons work together, keep reminding each other for safety purpose.
When start the engine indoors, make sure that the exhaust gas is forced outdoors.
If use hazardous or flammable material, please strictly operate according to manufacturer’s operation
manual. Operate in a well- ventilated place.
Never use gasoline as a cleaning solvent.
Do not touch the engine oil, radiator or muffler with bare hands to avoid scalding before it is cooled.
Check all the lines, and fittings related to the system for leakages, after repairing fuel, cooling, lubricating
or exhaust system .
Do not dispose used oil, coolant or defective parts optionally for environmental purpose.
CAUTION:
Use genuine LINHAI MOTO parts or their equivalent.
Place and store the disassembled parts separately in order for correct assemble.
Use special tools according to service manual.
Make sure that all parts used in reassembly are clean, lubricated them when specified.
Use the special lubricants, sealants and greases.
Pre-tighten the bolts, nuts and screws, then tighten according to the specified torque, from big to small and
from inner side to outer side.
Fix torque screw with torque wrench, clean grease or oil from the screw thread before fixing.
Check the parts after disassembling, clean the parts before measuring.
Check parts for tightness and proper operation, after assembling.
Replace the disassembled washers, o-rings, seals, locknuts, lockwashers, cotter pins, circlips with new
ones.