Linhai ATV 500-D T3 EFI, Руководство по обслуживанию

Страница: 152 / 291

CHAPTER 3 ENGINE
LH500ATV-D T3 EFI SERVICE MANUA 19.0
CHAPTER 3 ENGINE PAGE. 3- 119
3.6.2
FUEL INJECTION SYSTEM
3.6.2.1 ECU
3.6.2.1.1 Description & Working Principle
3.6.2.1.2 Appearance
3.6.2.1.3 Handling – DOs & DONTs
3.6.2.1.4 Installation requirements
3.6.2.1.5 Power Requirements
3.6.2.1.6 Temperature Requirements
3.6.2.1.7 Maintenance service and Repair
3.6.2.2 INJECTOR
3.6.2.2.1 Appearance
3.6.2.2.2 Sealrings
3.6.2.2.3 Sealrings replacement
3.6.2.2.4 Lubricant Recommendation
3.6.2.2.5 Over -Voltage
3.6.2.2.6 Temperature Requirements :
3.6.2.2.7Fuel Contamination
3.6.2.2.8Wire Routing
3.6.2.2.9 Handling - DOs & DONTs
3.6.2.2.10 Installation guide lines
3.6.2.2.11 Replacement Techniques
3.6.2.2.12Interchange ability
3.6.2.2.13Plugging
3.6.2.2.14Cleaning Procedure
3.6.2.3 Throttle Body As sembly (with stepper motor )
3.6.2.3.1 Description and Working Principle
3.6.2.3.2Appearance
3.6.2.3.3 Technical Parameters
3.6.2.3.4 Operating Conditions
3.6.2.3.5 Throttle Body Removal
3.6.2.3.6 Cleaning Procedure
3.6.2.3.7Throttle Body Installation
3.6.2.3.8Precautions
3.6.2.3.9 Handling - DOs & DONTs
3.6.2.4 Engine Cool ant Temper ature Sensor
3.6.2.4.1Description and Working Principle
3.6.2.4.2Appearance
3.6.2.4.3 Installation Requirements
3.6.2.4.4 Operating Environment
3.6.2.4.5 Storage Environment
3.6.2.4.6 Sample Cleaning
3.6.2.5 Intake AirPressure and Temperature Sensor(MAP&MAT)
3.6.2.5.1Description and Working Principle
3.6.2.5.2 Appearance
3.6.2.5.3 Operating Environment
3.6.2.5.4 Storage Environment
3.6.2.5.5 Electrical Environment