LINET Wissner-Bosserhoff ELEGANZA 4, Руководство по обслуживанию, Страница: 43 / 57

D9S001GE4-0101 43/ 57
Scale Calibration
–iBoard Basic version
5.3.1 Introduction
5.3.1.1 EU/US version
The display shows the load value. This can be adjusted to the required value by using the ZERO/T or HOLD
functions. If the value is negative, the first segment shows a minus sign. If the value is lower than -5.0kg (11.0 lb),
the display shows “
Lo
”. If the value is higher than 254,5 kg (561,1 lb), the display shows “
Hi
”.
If the value of absolute weight is lower than 0, the display shows “ – – Lo ”.
5.3.2 Diagnostic mode
In this mode it is possible to browse the scale system values.
Scale service mode activation:

Press the ZERO , CLEAR and HOLD buttons simultaneously for 5 seconds.

To exit diagnostic mode press CLEAR button
5.3.2.1 General instructions
Display:

The identification number and respective value is displayed

The first value displayed is always position TENS 1:
Identification
number
Value meaning Value
TENS 1 Absolute un-recalculated value
– tensometer 1 (rounded to ten)
TENS 2 Absolute un-recalculated value
– tensometer 2 (rounded to ten)
TENS 3 Absolute un-recalculated value
– tensometer 3 (rounded to ten)
TENS 4 Absolute un-recalculated value
– tensometer 4 (rounded to ten)
ABS WGH Absolute weight
ABS 0 Absolute 0
CON 1 Constant
– Tensometer 1
1,700 - 2,200
CON 2 Constant
– Tensometer 2
1,700 - 2,200
CON 3 Constant
– Tensometer 3
1,700 - 2,200
CON 4 Constant
– Tensometer 4
1,700 - 2,200
CON GR Gravitation constant 1 - 8
CON CAL Calibration constant 1,000
NR CAL Number of calibrations