LINET Wissner-Bosserhoff ELEGANZA 4, Руководство по обслуживанию, Страница: 24 / 57

D9S001GE4-0101 24/ 57
Undercarriage module
– Basic
The bed with basic equipment (e.g. without iBrake, Anticrash, etc.) is equipped with elementary undercarriage
module. The output from undercarriage module is molex connector which is connected to the column and after to
control box.
Foot controller (height setting)
The foot controller for height setting is a paired component of the bed. It is located on the undercarriage at the foot
section of the bed and attached to the undercarriage frame with two screws (
11±1 Nm
). There are three buttons on
the controller
– lift upwards, lift downwards and lift to examination position. A cable runs from the foot controller to the
undercarriage module (UM). The controllers are connected to the UM by an RJ12 connector. In the UM, the connectors
of the controllers are attached at position 4 and 5
.
The Mini GO function is engaged in the software of the control unit
for the foot controller. This is a function whereby pressing the foot controller button once again, the GO period runs for
20 seconds without the need for pressing GO on the siderail controller or handset (allows positioning without having
to use your hands).