DO9007J
rhubarb.
MAINTENANCE
- The appliance is easier to clean if you do so immediately after use.
- Don’t use abrasive products to clean your appliance.
- All detachable parts are dishwasher-safe.
- Switch the appliance off, remove the plug from the socket and wait till the fi lter has
stopped rotating.
- Remove the dirty parts from the motor unit and disassemble the appliance in the
following order:
•
Remove the pulp container.
•
Remove the food pusher.
•
Open the interlock.
•
Remove the lid.
•
Remove the juice and pulp divider together with the fi lter.
•
Clean these parts with a detergent and a soft brush or put them in the dishwasher.
•
Clean the motor unit with a damp cloth.
•
Attention
: Never put the motor unit in water.
PROBLEM SOLVING
1. The appliance isn’t working.
a) The juicer is equipped with a safety system. The appliance won’t work if all parts
haven’t been mounted properly. Make sure that the parts are assembled properly, but
fi rst switch off the appliance before you do so.
2. The motor gives of an unpleasant smell the fi rst times you use the appliance.
a) This isn’t unusual. If the smell won’t disappear after a few times, check the
quantities you are juicing and the juicing time.
3. The fi lter is blocked.
a) Switch the appliance off, clean the feed tube and the fi lter and juice a smaller
amount of food.
4. The fi lter touches de feed tube or vibrates strongly during the juicing.
a) Switch off the appliance and unplug it. Check if the fi lter has been placed
properly in the appliance and check if the fi lter is damaged.
17
