39
Note:
The IP ACCESS KVM SWITCH CLASSIC has its own independent real time clock.
Make sure the time setting of the IP ACCESS KVM SWITCH CLASSIC switch is correct.
(See the Section called Date and Time on page 50)
Enable Dynamic DNS
Enables the Dynamic DNS service. This requires a configured DNS server IP address.
Dynamic DNS server
This is the server name where the IP ACCESS KVM SWITCH CLASSIC registers itself in
regular intervals. At the time of writing, this is a fixed setting since only dyndns.org is currently
supported.
Hostname
This is the hostname of the IP ACCESS KVM SWITCH CLASSIC that is provided by the
Dynamic DNS Server. (Use the whole name including the domain,
e.g. testserver.dyndns.org
not just the actual hostname).
Username
You have registered this username during your manual registration with the Dynamic DNS
Server. Spaces are not allowed in the nickname.
Password
The password used during manual registration with the Dynamic DNS Server.
Check time
The IP ACCESS KVM SWITCH CLASSIC registers itself in the Dynamic DNS server at this
time.
Check interval
This is the interval for reporting again to the Dynamic DNS server by the IP ACCESS KVM
SWITCH CLASSIC.
40
5.5.3 Security
Force HTTPS
If this option is enabled, access to the web front-end is only possible using an HTTPS
connection. The IP ACCESS KVM SWITCH CLASSIC will not listen on the HTTP port for
incoming connections.
If you want to create your own SSL certificate that is used to identify the IP ACCESS KVM
SWITCH CLASSIC please refer to the section called Certificate on page 45.
KVM encryption
This option controls the encryption of the RFB protocol. RFB is used by the Remote Console to
transmit both the screen data to the administrator’s machine and the keyboard and mouse data
back to the host. If set to Off no encryption will be used. If set to Try, the applet tries to make an
encrypted connection. If connection establishment fails for any reason an unencrypted
connection will be used. If set to Force the applet tries to make an encrypted connection. An
error will be reported if connection establishment fails.
Group-based System Access Control
This is the IP filtering function, it keeps unauthorized hosts from accessing to the IP-KVM by
specifying IP filtering rules. It is important to fully understand what an IP filter is. If you don't fully
understand this, you will get unexpected results against your original plan.
