Linde G-TECTA SG, Руководство по эксплуатации

Страница: 21 / 24

21
UK
The Linde Group Warranty
Gas Detection Products
General
The Linde Group warrants gas detectors,
sensors and accessories manufactured and sold
by The Linde Group to be free from defects in
materials and workmanship for the periods listed in
the following tables. Damages to any Linde Group
products that result from abuse, alteration, power
fluctuations including surges and lightning strikes,
incorrect voltage settings, incorrect batteries, or
repair procedures not made in accordance with the
product’s Operating Manual, are not covered by
The Linde Group warranty.
The obligation of The Linde Group under this
warranty is limited to the repair or replacement
of components deemed by The Linde Group
Service Department to have been defective under
the scope of this standard warranty. To receive
consideration for warranty repair or replacement
procedures, products must be returned with
transportation and shipping charges prepaid to
The Linde Group, or to a Linde Group Authorised
Warranty Service Centre. It is necessary to obtain a
return authorisation number from The Linde Group
prior to shipment.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY AND
ALL OTHER WARRANTIES AND REPRESENTATIONS,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO, THE WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE. The Linde Group WILL NOT BE LIABLE
FOR LOSS OR DAMAGE OF ANY KIND CONNECTED
TO THE USE OF ITS PRODUCTS OR FAILURE OF ITS
PRODUCTS TO FUNCTION OR OPERATE PROPERLY.
Warranty periods for instruments
and accessories
Product Warranty period
G-TECTA
®
SG
G-TECTA
®
4G
G-TECTA
®
4GP
2 years from
date of purchase
G-TECTA
®
SG2 2 years from
date of purchase
G-DOCKA
®
SG2 1 year from
date of purchase
G-DOCKA
®
Hub 2 years from
date of purchase
Instrument chargers/
interfaces 2 years from
date of purchase
Warranty periods for sensors
Sensor type Warranty period
Oxygen and
Flammable Sensors 2 years
H
2
S & CO
Toxic Sensors
2 years
All other
Toxic Sensors 1 year
** Damage to combustible gas sensors by acute or
chronic exposure to known sensor poisons such as
volatile lead (aviation gasoline additive), hydride gases
such as phosphine, and volatile silicone gases emitted
from silicone caulks/sealants, silicone rubber moulded
products, laboratory glassware greases, spray lubricants,
heat-transfer fluids, waxes and polishing compounds
(neat or spray aerosols), mould-release agents for
plastics injection-moulding operations, waterproofing
formulations, vinyl and leather preservatives, and
hand lotions that may contain ingredients listed as
cyclomethicone, dimethicone and polymethicone (at the
discretion of The Linde Group Service department) void
The Linde Group’s Standard Warranty as it applies to the
replacement of combustible gas sensors.