•
Audio system maximum volume of 45%. A message will be shown in
the display when you attempt to exceed the limited volume. Also, the
speed-sensitive or compensated automatic volume control will be
disabled.
•
Always on setting. When this is selected, you will not be able to turn
off AdvanceTrac (if your vehicle is equipped with this feature).
CREATING A MYKEY
Use the information display to create a MyKey.
1. Insert the key you want to program into the ignition.
2. Switch the ignition on.
3. Access the main menu on the information display. Press
SETUP
using the information display buttons until
PRESS RESET TO
CREATE MYKEY
is displayed.
4. Press and release the
RESET
button.
HOLD RESET TO
CONFIRM MYKEY
will be displayed.
5. Press and hold the
RESET
button for two seconds until
MARK
THIS AS RESTRICTED
is displayed Wait until
KEY
RESTRICTED AT NEXT START
is displayed.
MyKey is successfully created. Make sure you label it so you can
distinguish it from the admin keys.
You can also program configurable settings for the key(s). Refer to
Programming/Changing Configurable Settings
.
Programming/Changing Configurable Settings
Use the Information display to access your configurable MyKey settings:
1. Switch the ignition on with an admin key.
2. Access the main menu on the information display controls and press
SETUP
until you see
RESET FOR MYKEY SETTINGS
in the
display.
3. Press and release the
RESET
button to display the MyKey setup
menus.
4. Press the
SETUP
button to display the next menu and scroll through
your choices.
5. Within any of the menus, press
RESET
to highlight your choice.
Use the arrow buttons to make a selection.
6. Press
SETUP
to enter your choice. The next configurable setting will
be displayed.
7. Repeat Steps 4 and 5 until you are done changing the configurable
settings.
MyKey
63
2014 Navigator
(nav)
Owners Guide gf, 1st Printing, June 2013
USA
(fus)