Lincoln Foodservice Impinger II 1100 Series, Руководство оператора

Страница: 14 / 24

Impinger II – Installation & Operation Manual 14
YOU ARE NOW READY FOR THE SERVICES TO BE CONNECTED. THIS SHOULD BE DONE BY A
QUALIFIED PLUMBER, ELECTRICIAN, OR INSTALLER OF YOUR CHOICE. FOR INSTALLATION IN THE
STATE OF MASSACHUSETTS: INSTALLATION OF THIS OVEN MUST BE PERFORMED BY A LICENSED
PLUMBER OR GAS FITTER. REFER TO “UTILITY SPECIFICATIONS” AND “INSTALLATION CODES AND
GUIDELINES” SECTIONS FOR ADDITIONAL INFORMATION.
NOTICE: The manual shut-off valve must be installed so that the test plug is on the oven side of the valve.
DO NOT ATTEMPT TO OPERATE THE OVEN
until connection of utility service and installation has been
fully inspected (START-UP CHECKOUT) by and Authorized Service Technician or a Lincoln Foodservice Products,
LLC Service Representative. This service is required by Lincoln Foodservice Products, LLC in order to assure the
oven(s) is/are properly installed and in working order. The warranty becomes effective upon verification of proper
installation.
The warranty shall not apply if the oven(s) is/are started up and operated prior to the “START-UP CHECKOUT”
being performed by an Authorized Service Technician or a Lincoln Foodservice Products, LLC Service
Representative.
OPERATION / PROGRAMMING
Do not work around conveyor belt with long hair, loose clothing, or dangling jewelry. Getting caught in the
belt could result in serious injury.
DANGER!
!
If the power supply cord appears to be damaged, do not attempt to operate the unit. Contact a service
agent or qualified electrician to repair!
DANGER! !
CONTROL PANEL ILLUSTRATION
Display
On / Off Switch
Temperature
Time
UP
DOWN
Quest Button
(Optional)