(5) Night Environment Setting
Push joystick down to select <NIGHT ENV.>, and then move joystick left or right to
select <NORMAL> mode or <IR LIGHT> mode.
Note
NORMAL: suitable in mostly night scene mode.
IR LIGHT: suitable in infrared (IR) illuminated night scene mode, can increase the
images under infrared lighting.
：
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
→
→
→
→
→
→
AUTO: When light level is over 10 lux, camera switches DAY automatically to
produce color image. When light drops below 5 lux, camera switches NIGHT
automatically to produce monochrome image. Under monochrome mode,
sensitivity is increased to 0.01 lux and can be used with IR illuminators.
SCHED.: DAY/NIGHT switches automatically between Day mode and Night mode by
schedule of time setting.
When selection is <SCHED.>, press
key into DAY/NIGHT Setting menu.
Push joystick down to select <DAY
NIGHT>, and then press
key into time
setting. Push joystick left or right to select time of DAY
NIGHT. Then press
key again to next item.
18 : 00
18 : 00
18 : 00
→
DAY/NIGHT SCHEDULE
DAY
NIGHT
NIGHT
DAY
BACK EXIT
→
18:00
06:00
C.SET
CTRL1
C.SET
CTRL1
→
→
→
→
→
→
Push joystick down to select <NIGHT
DAY>, and then press
key into time
setting. Push joystick left or right to select time of NIGHT
DAY. Then press
key again to next item.
06 : 00
06 : 00
06 : 00
DAY: Set to DAY mode and always produce constant color image.
NIGHT: Set to NIGHT mode and always produce constant monochrome image.
C.SET
CTRL1
C.SET
CTRL1
(6) Synchronization Mode Setting
INT : Use synchronization signal of internal camera.
ADVANCED SETTING
SHUTTER/AGC
WHITE BAL
<HLC>
DAY/NIGHT
NIGHT ENV.
SYNC
<IMAGE>
BACK EXIT
<MANUAL>
<ATW>
AUTO
NORMAL
INT
50
