Lika SMAX-AI1-PRG-L2, Руководство пользователя

Страница: 36 / 84

SMAX MODBUS®
Figure above) is also shown. For more information refer to the Serial com baud
rate [0005 hex]
register on page 65.
Operating parameters
It groups the functions available in the
Operating parameters [0003 hex]
register (see on page 63) and shows their current enabling 1/disabling 0 state.
The decimal value which results from the binary sequence of the sixteen bits in
the register (consider that 0 = DISABLED, 1 = ENABLED) will appear in the field
under the label (0 in the Figure above).
Enable scaling function
It allows both to enable 1/disable 0 the scaling function and to show its current
enabling/disabling state. Select/deselect the check box to enable 1/disable 0 the
function, the decimal value which results from the binary sequence of the
sixteen bits in the
Operating parameters [0003 hex]
register will appear in
the field on the left side. When the function is enabled, the text of the label is
coloured yellow. For more information refer to the
Scaling function
parameter
on page 64.
Change counting dir.
It allows both to change the counting direction function and to show its current
setting. Select/deselect the check box to switch between the options, the
decimal value which results from the binary sequence of the sixteen bits in the
Operating parameters [0003 hex]
register will appear in the field on the left
side. When the function is enabled, the text of the label is coloured yellow. For
more information refer to the
Code sequence
parameter on page 64.
Control word
It groups the functions available in the
Control Word [000A hex]
register (see
on page 66) and to show their current enabling-activation 1/disabling-
deactivation 0 state. Use the check boxes / buttons on the right side to set the
functions, the decimal value which results from the binary sequence of the
sixteen bits in the register will appear in the field under the label (0 in the Figure
above). For more information refer to the
Control Word [000A hex]
register on
page 66.
Enable watchdog
It allows both to enable 1/disable 0 the watchdog function provided by the
MODBUS protocol and to show the enabling/disabling state. Select/deselect the
check box to enable 1/disable 0 the function, the decimal value which results
from the binary sequence of the sixteen bits in the
Control Word [000A hex]
register will appear in the field on the left side. When the function is enabled,
MAN SMAX MB E 1.2 Quick reference 36 of 84