Lightware FP-UMX-TPS-TX120, Руководство пользователя, Страница: 89 / 183

6. LW2 Programmer's Reference UMX-TPS-TX100 series – User's Manual 89
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
6.3.8. View Serial Number
The device responds its 8-digit serial number.
Command and Response #serialnumber
ȩ
{S}
Ȩ
(SN:< SERIAL_N >)CrLf
Example
ȩ
{s}
Ȩ
(SN:5A004254)
The serial number structure can be found in the About the Serial Number section.
6.3.9. View Installed Board
Shows the hardware name and revision of the installed cards.
Command and Response
ȩ
{IS}
Ȩ
(SL#·0·< MB_DESC >)CrLf
Ȩ
(SL·END)CrLf
Example
ȩ
{is}
Ȩ
(SL# 0 UMX-TPS-TX140K)
Ȩ
(SL END)
The device reports its motherboard (slot 0).
6.3.10. View Firmware for All Controllers
Shows the firmware versions of all installed controllers.
Command and Response
ȩ
{FC}
Ȩ
(CF·< DESC >)CrLf
Ȩ
(CF·< DESC >)CrLf
Ȩ
…
Ȩ
(CF END)CrLf
Example
ȩ
{fc}
Ȩ
(CF UMX-TPS-TX140K 1.5.0b1 r53)
Ȩ
(CF END)
The device has one control panel.
6.3.11. Query Health Status
Internal voltages and measured temperature values are shown.
Command and Response #status
ȩ
{ST}
Ȩ
(ST·< DESC >)CrLf
Example
ȩ
{st}
Ȩ
(ST CPU 12.16V 5.03V 3.30V 3.33V 3.37V 1.30V 1.86V 1.00V 53.22C 53.26C)
6.3.12. Restart the Device
The device can be restarted without unplugging power.
Command and Response #reboot #restart
ȩ
{RST}
Ȩ
Example
ȩ
{rst}
Ȩ
The device reboots; no response is sent in this case.
6.3.13. Restore Factory Default Settings
Settings can be reset to factory default values as follows:
Command and Response
ȩ
{FACTORY=ALL}
Ȩ
(FACTORY ALL…)CrLf
Example
ȩ
{factory=all}
Ȩ
(FACTORY ALL…).
All settings and parameters are reset to factory default, see the table in the Factory Default Settings section.
#factory
  
