5. Software Control - Lightware Device Controller
UMX-TPS-TX100 series – User's Manual
85
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
5.14.
Advanced View Window
#advancedview
#terminal
1
LW3 protocol help
Pushing the button results a help window opening which describes the most
important information about LW3 protocol commands in HTML format.
2
Protocol tree
LW3 protocol tree; select an item to see its content.
3
Edit mode
The default appearance is the read-only mode. If you want to modify the
values or parameters, tick the option. You will be prompted to confirm your
selection.
4
Warning mode
If this is checked, a warning window pops up when you enable Edit mode.
5
Node list
Correspondent parameters and nodes are shown which are connected to the
selected item in the protocol tree. The commands typed in these fields are
escaped automatically
Manual
button: Manual (short description) of the node can be called and
displayed in the terminal window.
Set
button:
Saves the value/parameter typed in the textbox.
Call
button:
Calls the method, e.g. reloads factory default settings.
6
Terminal window
Commands and responses with time and date are listed in this window. Sent
command starts with ‘>’ character, received response starts with ‘<’ character.
The color of each item depends on the type of the command and response.
The content of the window can be emptied by the
Clear
button. If the
Autoscroll
option is ticked, the list is scrolled automatically when a new line is added.
7
Command line
The commands typed in this line are not escaped automatically. See more
information in the
1
3
2
4
6
7
5