Lightware FP-UMX-TPS-TX120, Руководство пользователя, Страница: 70 / 183

5. Software Control - Lightware Device Controller UMX-TPS-TX100 series – User's Manual 70
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
Ports Section of the UMX-TPS-TX100 Series Devices
User can set the name and command injection port to each sources and destinations. For more details
about IR interface see the IR Interface section.
Infra tab - Ports window for the UMX-TPS-TX100 series devices
Ports Section of the UMX-TPS-TX140-Plus UMX-TPS-TX140K and WP-UMX-TPS-TX130-US Models
Infra tab - Ports window for the UMX-TPS-TX140-Plus model
The user can set the name and command injection port to each sources and destinations. For more details
about IR interface see the
IR Interface section. The message sending function (little-endian pronto hex code)
is available in this section. #commandinjection
Sending pronto hex codes (Little-endian format)
Copy the raw, little endian-format IR code into the
Send Pronto Hex
entry field and click the
Send
button.
The maximum length of the code can be 765 characters (765 bytes). For more details about the accepted IR
code formats, see Sending Pronto Hex Codes in Little-endian Format via IR Port section.
This entry field does not store the code. The code can be saved into the action in the event manager with
the following parameters:
Category:
Infra;
Expression:
Send pronto hex
; Port:
D1;
Pronto hex:
<custom_code>
In the Event Manager, the maximum length of the code can be 184 characters (184 bytes).
INFO: Sending bigger endian-format code is available with LW3 protocol command, see Sending Pronto
Hex Codes in Big-endian Format via IR Port section.
Clear all IR codes
Clicking on the button results deleting all stored IR fingerprints.
  
