Lightware FP-UMX-TPS-TX120 Скачать руководство пользователя страница 80

Страница: 80 / 183

5. Software Control - Lightware Device Controller

UMX-TPS-TX100 series – User's Manual

Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2

5.11.4.

Backup

Details about this function can be found in the

Configuration Cloning (Backup Tab)

section.

5.11.5.

System

System tab in Settings menu

Cleartext Login (Login Settings)

DIFFERENCE:

This feature is available only in UMX-TPS-TX140K and TX140-Plus models from FW

package v1.5.0b4.

This cleartext login tool allows setting a password, thus, the device will not accept any command coming

from a control interface (RS-232, Ethernet, etc…) without login. The device will be visible in the Device

Discovery window (as the device type and the serial number can be queried without login) but connection

can be established only after successful login. The login is valid until a TCP socket break in case of Ethernet

connection.

#login

ATTENTION!

If the login is enabled, the password will be asked when opening

The Built-In Miniweb.

INFO:

The login password is erased and the login is disabled when restoring the factory default values.

Further functions

▪

Download system log

- saving the file of the device.

▪

Load factory defaults

- recalling factory defaults settings and values. All factory default settings are

listed in the

Factory Default Settings

section.

▪

Reboot

- rebooting the system.

#factory

#log

#systemlog

#reboot #restart



 



Содержание FP-UMX-TPS-TX120
























































































































































































Результаты поиска

Содержание FP-UMX-TPS-TX120

Отзывы:

Lightware FP-UMX-TPS-TX120, Руководство пользователя, Страница: 80 / 183

Результаты поиска

Содержание FP-UMX-TPS-TX120

Отзывы: