background image

System Overview .............................................................................................. 1
System Controls and Functions:

7100DX/Receivers - 

front panel ................................................................... 2

7100DX - 

Back Panel ................................................................................... 3

Handheld Microphone Transmitter ............................................................... 4
Belt-pack Microphone Transmitter ............................................................... 5

System Installation ............................................................................................ 6
Operating Instructions:

Wireless Receivers ....................................................................................... 7

Installing or Replacing a Receiver Module ................................................ 8

Handheld Microphone Transmitter ............................................................... 9
Belt-pack Microphone Transmitter ............................................................. 13
Wireless Microphone Operation ................................................................. 17

Trouble Shooting Guide .................................................................................. 18
Specifications:

Diversity Receivers ..................................................................................... 19
Transmitters ............................................................................................... 20

Channel/Frequency Assignments .................................................................... 20
Components & Accessories ............................................................................ 21
Warranty Information ...................................................................................... 22
Equipment Log ............................................................................................... 23
User Notes ...................................................................................................... 24

Table of Contents

LightSPEED is a trademark of LightSPEED Technologies, Inc.  Other names and brands

may be claimed as the property of others. Copyright © 2005 LightSPEED Technologies, Inc.,

All rights reserved.  Printed in USA.

LightSPEED

TM

Содержание 7100DX QUAD-RAK




























Отзывы: