Lightspeed 7100DX QUAD-RAK Скачать руководство пользователя страница 4

Страница: 4 / 27

Antenna "B" Input:

Antenna "B" Input: The antenna can be connected directly to this BNC input jack, or
extended to a remote location with antenna cable.

Level Selecting Switch:

Level Selecting Switch: Changes unbalanced audio output level of the receiver to
"MIC" or "LINE" level.

Unbalanced Audio Output Jack:

Unbalanced Audio Output Jack: The AF signal output from this jack may be
connected to a "LINE IN" or “MIC IN” jack on the mixer/amplifier.

Balanced Audio Output Jack:

Balanced Audio Output Jack: The balanced AF signal output from this jack may be
connected to a balanced microphone input jack by using a standard XLR mic cable.
This jack outputs the combined AF signal for all system receivers.

(1-4 receivers

depending on specific package). ***** Note connector pinout schematic.

Channel 4 Audio Output Jack:

Channel 4 Audio Output Jack: Balanced AF signal output jack for the Channel 4
receiver module to be mixed/amplified individually.

Channel 3 Audio Output Jack:

Channel 3 Audio Output Jack: Balanced AF signal output jack for the Channel 3
receiver module to be mixed/amplified individually.

Channel 2 Audio Output Jack:

Channel 2 Audio Output Jack: Balanced AF signal output jack for the Channel 2
receiver module to be mixed/amplified individually.

Channel 1 Audio Output Jack:

Channel 1 Audio Output Jack: Balanced AF signal output jack for the Channel 1
receiver module to be mixed/amplified individually.

Antenna "A" Input:

Antenna "A" Input: The antenna can be connected directly to this BNC input jack, or
extended to a remote location with antenna cable.

10.

10. AC Power Cord Input:

AC Power Cord Input:

AC Power Cord Input: Plug 100-240VAC line cord into this connector.
The system senses input voltage automatically.

System

Back Panel

BALANCED

AF OUT

CH1

CH2

CH3

CH4

MIC

LINE

1 2

1 GND
2 +
3 –

ANT. B

ANT. A

AC IN 100V-240V

Controls and Functions

User Notes

Содержание 7100DX QUAD-RAK




























Результаты поиска

Содержание 7100DX QUAD-RAK

Отзывы:

Похожие инструкции для 7100DX QUAD-RAK

Бренды по названию

Популярные бренды

Lightspeed 7100DX QUAD-RAK, Руководство пользователя

Результаты поиска

Содержание 7100DX QUAD-RAK

Отзывы:

Похожие инструкции для 7100DX QUAD-RAK

Бренды по названию

Популярные бренды