System Installation
System
Back Panel
Connecting the Antennas
Connecting the Antennas
Connecting the Antennas
Connecting the Antennas
Connecting the Antennas
1. The two 3/4 wave antennas can be installed quickly
and easily to the rear of the receiver by twisting them
onto the BNC connectors marked ANT A and ANT B.
For optimum reception in trouble areas, it may be
necessary to use remote antennas.
Connecting A
Connecting A
Connecting A
Connecting A
Connecting AFFFFF (audio
(audio
(audio
(audio
(audio))))) Output
Output
Output
Output
Output
2. INDIVIDUAL BALANCED:
INDIVIDUAL BALANCED:
INDIVIDUAL BALANCED:
INDIVIDUAL BALANCED:
INDIVIDUAL BALANCED: The XLR output jacks
labeled CH1-CH4 output the line level audio signal
for each receiver independently. Connect the AF
output of each receiver from these XLR jacks to a
balanced input jack on the mixer or amplifier.
3. COMBINED BALANCED:
COMBINED BALANCED:
COMBINED BALANCED:
COMBINED BALANCED:
COMBINED BALANCED: The XLR output jack
labeled “BALANCED” combines the audio from all
the receiver modules in the Quad-RAK together and
outputs them at a single source. To control the
various output levels of the individual receivers,
adjust the volume level accordingly on each receiver
module.
4. UNBALANCED:
UNBALANCED:
UNBALANCED:
UNBALANCED:
UNBALANCED: The 1/4” unbalanced output jack
labeled “AF OUT” combines the audio from all the
modules in the Quad-RAK together and outputs
them at a single source. To control the various
output levels of the individual receivers, adjust the
volume level accordingly on each receiver module.
Connect the AF output to a “Line-In” or “Mic-In”
(note the MIC-LINE level switch) jack on the mixer
using a 1/4” ouput cable.
AC Power Cord
AC Power Cord
AC Power Cord
AC Power Cord
AC Power Cord
5. Connect into any standard outlet.
Caution:
Make sure that audio levels
on receiver modules are turned all the
way down before you begin.
AC IN 100V-240V
1
5
3
2
4
BALANCED
AF OUT
CH4
MIC
LINE
1 2
3
1 GND
2 +
3 –
ANT. B
1
ANT A
3
BA
LANCED
4
AF OU
T
5
2
CH4
6
Components & Accessories
AC-Quad-RAK
7100DX Quad-RAK Chassis
RX-7100R
100 Channel UHF Receiver Module
TX-HM900
100 Channel UHF Handheld Transmitter
TX-BP900
100 Channel UHF Belt-pack Transmitter
MC-LS4S
Semi-directional Microphone with TA4F Connector and Lapel
Clip
MC-TK250S
Noise-Canceling Headset Microphone with TA4F Connector
BC-TX900
Battery Charger for BP900 or HM900
(Optional)
BA-NH1
AA NiMH Rechargeable Battery
(Optional)
Contact your LightSPEED representative for details, pricing and availability.
7100DX Individual Components and Accessories
Order Code
Product Description
21
