Note that linking pins 4 and 14 enables external control.
For stand-alone use and for automatic sequence starting it is sufficient to link pins 4 and 14 and pins 6 and
15.
MEMORY CARD
The memory card type is PCMCIA type 1, 256k (or greater) SRAM.
If the Store is in EXTERNAL CONTROL mode, the memory card is ignored. Otherwise, when the card is
inserted, the display shows Crd.
To Store to Card
Hold
4
pressed for two seconds. Sto appears in the display, followed by YES. If the card is
write-protected, Pro is seen in the display. The card stores all scenes, scene types, fade times and hold
times.
To Recall from Card
Hold AUTO pressed for two seconds. rcl appears in the display, followed by YES. If the card is
write-protected, Pro is seen in the display. All scenes, scene types, fade times and hold times are loaded
into the Store.
DMX CONNECTIONS
DMX connections to the QStore are via 5-pin XLR connectors, wired pin 1 = screen, pin 2 = data -,
pin 3 = data +. Pins 4 and 5 are not used.
LightProcessor DMX Tools, April 2003
Page 12
Store
7
6
5
4
3
2
1
13
14
25
Fig. 7
