Addressable Track Master Module (TM) - CAMTM
Sends control signals along the track to other modules
from any location on the track. Used to create cycles,
scenes, lighting effects, and dim, raise, or turn on or off
the light levels on all modules on the track
simultaneously. Use one track master per track branch
circuit. Accepts commands from Laser Remote Control
and Wall Remote Control units. The Track Master can
control up to 17 modules per circuit (To control more
than 17 modules, additional circuits must be used and
connected with Lightolier Controls Compose Firewall.
The Firewall is available in 4 or 8 circuit units.).
Laser Remote Control (LRC) - CAMLRC
Used to program the system and change light levels
from a remote location. Equipped with a laser and
infrared (IR) transmitters. The visible laser signal, when
pointed at a module, places the module in program
mode. The laser signal accuracy allows a single unit to
be selected easily when multiple modules are on the
track & the IR signal programs the desired functions.
The remote will allow the user to set the light level, turn
modules on or off, set and run multiple lighting scenes,
set fade rates, set cycle times, and begin and end
cycles. The remote operates the Dimming Module,
Non-Dim On/Off Module, and Track Master Module.
Addressable Track Non-Dimming On/Off Module
(NDM) – CAM250ND
Individually addressable module that mounts anywhere
along the track and accepts any Lytespan Line & Low
Voltage Incandescent, fluorescent, and metal halide
luminaire (see luminaire compatibility for exceptions) for
the purpose of addressing a selected single luminaire
for switching On/Off, while powered by the same track.
Programmable to store desired light levels (On or Off) of
single luminaires or to group with two or more
luminaires within the same system for the purpose of
creating light scenes and effects.
Luminaire Compatibility
:
Module can be used with any Lytespan Incandescent
line voltage, incandescent low voltage, metal halide, &
fluorescent luminaire, 250W MAX. DO NOT USE with
Power Jack, Sof-Tech Metal Halide, Lytespots,
Powerwash T5 Track Mount, Lyteflood L40 & L39, or
Convenience outlet Units
See individual luminaires instruction sheet for
installation into Module.
RED LED
IR & LASER
RECEIVER
(Target area for
laser & IR signals)
GREEN LED
IR & LASER
RECEIVER
(Target area for
laser & IR signals)
RED LED
IR & LASER
RECEIVER
(Target area for
laser & IR signals)
Transmitter
4
5
