Lightmed TruScan Pro Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 109

background image

LIGHTMED TruScan Pro

–

Operator’s Manual Rev. No. 01

Page

8

of

109

Section 1

Introduction

This  manual  is  intended  to  provide  the  Operator  with  an  overview  of  the  operation  and  safety
requirements  for  the  TruScan  Pro  Ophthalmic  Laser.  This  manual  is  not  intended  to  provide
instructions on actual treatment procedures, and it is expected that users will have undertaken
training prior to using the equipment.

Caution  has  been  taken  into  consideration  in  the  preparation  and  revision  of  this  Manual.
However, there is no guarantee that all information written here will be accurate. The information
provided in this Manual is subject to change without notice.

Only approved or authorized accessories may be used with this laser system. The Manufacturer
and Distributor organization shall not be held liable or responsible for damages or injury caused
as a result of using unapproved accessories. This includes all optical fiber systems, laser delivery
units (LDU), safety filters, safety glasses, and table units.

All  maintenance  and  service  work  must  be  carried  out  by  authorized  and  trained  Service
Technicians  and  only  those  procedures  outlined  in  the  Operator

’s and Service Manual are

allowed. Any service work carried out by unauthorized persons will void all warranties.

No circuit diagrams or component part lists are to be provided for this laser system. If you require
any technical documentation that is not provided in this manual, please contact the Manufacturer
or your local distributor, in writing, with your reasons for requesting them and only then a copy of
the Service Manual may be provided.

Before using the TruScanPro Ophthalmic Laser system, the operator should read this manual
carefully and pay attention to the sections of safety, operation, and maintenance.

«
...
6
7
8
9
10
...
»

Содержание TruScan Pro














































































































Отзывы:

Нет отзывов

Похожие инструкции для TruScan Pro

Бренд: iGuzzini Страницы: 20

Бренд: Gardena Страницы: 13

Бренд: Parata Страницы: 40

Бренд: Nektar Страницы: 3

Бренд: Youkey Страницы: 86

Бренд: Hach Страницы: 66

Бренд: Hach Страницы: 14

Бренд: Hach Страницы: 144

QuikChem 8500 2 Series

Бренд: Hach Страницы: 80

Бренд: Hach Страницы: 178

Бренд: Hach Страницы: 32

Бренд: hager Страницы: 4

Бренд: Mackie Страницы: 34

Бренд: Mackworth Страницы: 38

Бренд: P&P Страницы: 6

Бренд: LAPPSET Страницы: 16

Frontier FC5706

Бренд: OHAUS Страницы: 47

Бренд: Ocutech Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды