Lightmed TruScan Pro Скачать руководство пользователя страница 39

Страница: 39 / 109

LIGHTMED TruScan Pro

–

Operator’s Manual Rev. No. 01

Page

109

4.3.2

Console Control Panel

The controls on the console control panel are described in more details below:

Figure 12: Console control screen.

No.

Item

Description

READY

Inactive

The system is in “STANDBY” mode, where
both the aiming beam and laser power are
disabled.

Activated

The system is in “READY” mode and both
the aiming beam and laser power can be
delivered to the patient once the footswitch
is pressed.

STANDBY

Inactive

The system is in “READY” mode and both
the aiming beam and laser power can be
delivered to the patient once the footswitch
is pressed.

Activated

The system is in “STANDBY” mode, where
both the aiming beam and laser power are
disabled. The system will automatically go
into “STANDBY” mode if it is not operated

for 10 minutes.

Clear

Inactive

This button is not activated, which means
the total laser shot counter is not reset to
zero.

Содержание TruScan Pro














































































































Результаты поиска

Содержание TruScan Pro

Отзывы:

Lightmed TruScan Pro, Руководство оператора, Страница: 39 / 109

Результаты поиска

Содержание TruScan Pro

Отзывы: