Lighthouse RLPC 0.1mm, Руководство по эксплуатации

Страница: 38 / 60

Lighthouse REMOTE Liquid Particle Counter (4-20mA output) Operating Manual
4-8 248083296-1 Rev 3
Note:
The < and >
characters are part of the
command and must be
typed. The brackets [ and ]
are field delimiters and are
not typed.
<x [yyyy]>
where:
< = Start Character
Note:
All command
characters are lower case,
except for the V (verbose).
x = Command Character
yyyy = Optional Command Parameter
> = Terminating Character
Handshake
Upon execution of the command, assuming
<V>
Verbose mode is on,
the REMOTE instrument will send a response based on the value of the
counts, suppress alarms, and alarm status. Examples of responses are
listed below:
<ERR>
= Error in Command String.
-or-
Sample: ch1-2: 0, 0 Range1= 5000, Range2= 2500.
When the unit is powered up, it sets up the counters and timers, and
starts reporting data. The data will be similar to this example:
Sample: ch1-2: 0, 0 Range1= 5000, Range2= 2500.
Sample: ch1-2: 0, 0 Range1= 5000, Range2= 2500.
Protocol
Protocol is defined through an RS-232 interface. The hardware
protocol is defined as:
Baud Rate: 9600
Data Bits: 8
Stop Bits: 1
Parity: None
Flow Control: None