Lighthouse RLPC 0.1mm, Руководство по эксплуатации

Страница: 21 / 60

00
248083296-1 Rev 3 3-1
3
Get Started
Initial
Inspection
The instrument is thoroughly inspected and tested at the factory and is
ready for use upon receipt.
When received, inspect the shipping carton for damage. If the carton is
damaged, notify the carrier and save the carton for carrier inspection.
Inspect the unit for broken parts, scratches, dents or other damage.
If the carton is not damaged, keep it for reshipping the instrument for
its annual factory calibration.
RETAIN THE INLET AND OUTLET
SHIPPING CAPS!
Annual
Calibration
The manufacturer recommends that Lighthouse instruments be
calibrated annually by a Certified Lighthouse Service Provider to
ensure it continues to perform within specification.
Shipping
Instructions
Should it become necessary to return the unit to the factory for any
reason, be sure to contact Customer Service and obtain a Return
Material Authorization (RMA) number. Reference this number on all
shipping documentation and purchase orders. After receipt of the
RMA, follow the instructions below:
WARNING: If the sensor must be returned for service or when it is
returned for calibration, the Flow Cell must be flushed with DI water
or reagent grade isopropyl alcohol and blown dry with clean air and
the nozzles capped. Any chemicals present in the sensor at the time of
shipping require specific hazardous materials warnings on the
shipping container. A Material Safety Data Sheet (MSDS) must be
included for every chemical inside the sensor at the time of its
shipment. If the Flow Cell is not clean and dry prior to shipping, it
may be damaged (freeze-fracture, dried contaminants) and require
replacement during servicing or calibration.
1. When the conditions in the above warning are met, use the original
container or carton and packing materials whenever possible.