Lighthouse Handheld 3016 IAQ, Руководство по эксплуатации

Страница: 21 / 136

Unpacking, Inspecting and Installation
5HY 3-3
Install the Battery
The HANDHELD comes with a standard rechargeable battery. An
optional external battery charger is available; otherwise, the battery
recharges in the unit when the unit is plugged into AC power.
Install the battery as illustrated in the following instructions.
1. Make sure that the power switch is in the OFF position and the
instrument’s power adapter is not connected.
2. Open the battery compartment by sliding the battery compartment
door on the bottom of the unit to the left to unlock it. When the
door is unlocked, open the door. The hinge is on the right side of
the door. See Figure 3-1.
Figure 3-1 Open the battery compartment door
3. Pull the battery release ribbon out of the battery compartment as
shown in Figure 3-2.
Figure 3-2 Pull Battery release ribbon out