263920 R
2
Page 21
S
ervice
5.2-5
Free Lift Cylinder Removal -
Mast on Floor
1.
Remove the mast from the truck as described in
Section 5.1.
2.
Lay the Mast face-up, blocking under the lower
mounts so the Mast is level ( see Figure 20).
3.
Roll the carriage upward to slacken the free lift
chains and internal reeving (if equipped).
4.
Remove the snap ring fastening the crosshead to the
cylinder rod
5.
Pull the crosshead with chains and hoses (if
equipped) of the cylinder rod.
6.
Roll the carriage above the free lift cylinder.
7.
Using a 1-in. wrench, disconnect the tube from the
cylinder fitting. Cap the cylinder fitting and plug
the tube.
8.
Using a 5-mm Allen wrench, remove the cylinder
strap.
9.
Remove the cylinder from the Mast.
10.
For reassembly, reverse the above procedures.
MA0074.eps
8
2
5
6
4
7
9
Figure 20. Removing Free lift Cylinder Mast
on Floor.