Lifetime Sentinel 6414, Руководство пользователя с инструкциями по сборке

Страница: 7 / 44

OPTION 2: Filled Wood Frame
Once all boards are level and do not wobble,
pack “Pea” gravel around the outside of the
frame, and slope away from frame.
Now fill the inside of the frame with “Pea”
gravel. Use a leveling board to scrape off extra
fill material and to level the surface.
42”
124”
Square up the frame by measuring
from corner to corner. Measurement A
should equal Measurement B.
Item Qty.
2” x 4” x 42” treated board* 2
2” x 4” x 121” treated board* 2
8d 1 1/2” common nails 16
1” ‘L’ bracket 4
“Pea” gravel 2.6 cu. ft.
Leveling board (2” x 4” x 14’) 1
* Must be rated for outdoor use
Place platform in the desired location. If platform does not rest level on the
ground, build up low points with loose dirt until platform is stable.
Nail an L-bracket on each corner of
the frame with 8d nails.
Be sure you use lumber that is treated and approved for
outdoor use. Cut outside frame to 1” by ” outside
dimensions:
A
B
Square up the frame by measuring
from corner to corner. Measurement A
should equal Measurement B.
A
B
Be sure that
frame is level.
Place platform in the desired location. If platform does not
rest level on the ground, build up low points with loose dirt or
“Pea” gravel, until platform is stable.
Cut Plywood into sizes shown below (or called for on
previous page). Arrange the Plywood according to the
diagram and nail into place with 8d x 1 1/2” nails.
42” x 96”
42” x 27”