Lifetime Sentinel 6414, Руководство пользователя с инструкциями по сборке

Страница: 32 / 44

3
Lift and slide Right Door onto Hinge and secure with a 1/” x 1 1/” Bolt (MC), 1/” Washers (MN) and
1/” Cap Nuts (MJ).
17h
There may be uneven spacing between and around
the doors at this stage of assembly. This is normally
resolved as you complete the remaining assembly steps.
If, after assembly, the spacing is still uneven, see the
“Adjust Door Spacing” step at the end of this manual.
Put Washers (MN) and
Cap Nuts (MJ) on Bolts
(MC).
Door Hinge Alignment
Use this tip if the shed doors will
not close or latch completely:
1. Open the door that won’t
close.
2. Apply downward pressure on
the door (next to the hinge) by
either hanging on the door or
tapping with a rubber mallet
(place a piece of wood between
the mallet and the door to avoid
damage to the door).
Assembly T
ip #7
Screw the Deadbolt Strike Plate (CJ) into place in the doorway with #10 x 1/”
Screws (MM).
17i
Hardware Bags: 1012086
Step 17 Hardware (continued)
MJ ()
MN ()
MC ()
MM ()
CJ
MM
Screwdriver, 7/16” Wrench