Lifetime Sentinel 6414, Руководство пользователя с инструкциями по сборке

Страница: 12 / 44

1
Install the next Wall Panel (JF) at the front left corner of
the shed. Then connect with a Corner Channel (AI). See
Assembly Tip #2 (p. 9) .
7
Assemble Last Corner
7a
FE (1)
Step 7 Hardware
Hardware Bag: 1009126
Screwdriver
8
Install Trim to Corners
Snap six Black Trim Brackets (HA) to a corner of the shed.
Fasten each Bracket with two #10 x 1/” Screws (MM). There are
no pilot holes in the shed wall, the screws are inserted directly
into the plastic.
8a
Slide a Corner Trim Piece (AL) onto the Brackets. Align the
Trim peice with the top of the Wall Panel and Fasten with a
# Pan-Head Screw (ME). Insert the Screw on the side of the
shed so that it will be hidden by the roof overhang.
8b
MM ()
Step 8 Hardware
HA
Hardware Bag: 1009129, 1012086
Screwdriver
Use extreme caution when standing on ladders to
perform assembly steps. Follow all warnings and
cautions on the ladder. Failure to follow all of these
instructions and warnings could lead to serious
personal injury or property damage.
WARNING
Repeat steps 8a and 8b for all four corners.
MM
MM
The tab on the Trim Brackets fit into
the six screw indentations along
each corner of the shed.
AL
AL
ME
Be Sure that the
Corner Trip Piece is
even with the front
edge of the Wall
Panel, before securing
with a Screw (ME).
ME ()