Lifetime Sentinel 6414, Руководство пользователя с инструкциями по сборке

Страница: 6 / 44

42”
124”
1
Site Selection
The actual dimensions of your shed (at its widest and longest points) are 11’ x 3.5’. Be sure to select a site
that will accomodate these measurements. The base of the shed is slightly smaller than this, so you will
need to create a level surface that is at least 1” x ”. We recommend using a level cement or patio style
surface. This will provide the best long-term performance for your shed.
11’
11’
3.5’
Wherever possible you should use the surfaces described above. When this is not possible, we
recommend you use one of the following options:
Alternate Site Preparation
OPTION 1: Wood Platform
Be sure you use lumber that is treated and approved for
outdoor use. Build outside frame to 1 inches by inches
outside dimensions:
1a
Item Qty.
2” x 4” x 121” treated board* 4
2” x 4” x 42” treated board* 2
42” x 96” Plywood (ACX/Exterior) 1
27” x 42” Plywood (ACX/Exterior) 1
16d 3” common nails 16
8d 1 1/2” common nails 28
* All lumber must be rated for outdoor use
To be sure to
have studs in the
correct location
to nail plywood in
the next step, start
measuring here
& measure from
center to center
Surface must be leveled before installation. If
the surface is not properly leveled, the Outdoor
shed will not assemble or function correctly.
Proper surface leveling will save you time in the
long run, so please do not ignore this step.
3.5’
16” 16”
42”
124”
NOTICE: Shed Extension Kits are available
for this shed. Please consider possible shed
expansion when planning the site for your shed.
See inside the back cover of this manual for
information on ordering Extension Kits.