Lifetime Sentinel 6414 Скачать руководство пользователя страница 5

5

- 2 -

• 

The plastic pieces of your shed may become damaged by ov

er tightening the screws. To 

avoid this damage, we strongly recommend the use of a low-pow

ered power screwdriver or a 

drill that has an adjustable clutch that is set on a low-torque setting. If neither is av

ailable, use 

a hand screwdriver. If a hand screwdriver is all y

ou have, take several breaks…your wrist will 

need it!

• 

You will also need two small step ladders (when it comes time to do the roof

!).

• 

Before beginning assembly, remove the Parts List from the center of this Owner

’s Manual 

and take an inventory of the parts included with y

our Outdoor Storage Shed.  Also, read through 

the entire instruction manual. It’s always a great practice to get a feel for the flow of the process 

and to familiarize yourself with the parts inv

olved. But, try not to get ahead of yourself and start 

the process out of order.

• 

FOLLOW THE INSTRUCTIONS IN ORDER! Ev

erything goes together in a certain order, 

and we have learned what that correct order should be. In our state-of-the-art research and test

-

ing facility, we have painstakingly created these instructions. The order of construction is there 

for a reason, and some parts simply will not fit if built out of order

. Just follow along with the 

order in the instructions and everything will fit together and things will go v

ery smooth.

• 

YOUR SHED MUST BE BUILT ON A LEVEL

 SURFACE! If the spot you have chosen to 

place your wonderful new Outdoor Storage Shed is not lev

el, the shed will not assemble correct-

ly! We recommend a cement patio, a wood platform or creating a pad with pea grav

el. Your shed 

is meant to last a lifetime, so provide the proper foundation for it before y

ou start to build.

• 

Before you build it, make sure you are allow

ed to build it! Consult all building codes, as 

well as city and county ordinances, to ensure that y

ou do not require a building permit to con-

struct your Outdoor Storage Shed. Proper building permit documentation may be required in 

your neighborhood, and it would be quite unfortunate to learn this after y

our Outdoor Storage 

Shed is already built!

Now that you’re ready to begin the construction of y

our wonderful new Outdoor Storage Shed, 

step back, take a deep breath, get yourself a large cold bev

erage and enjoy yourself. We guaran-

tee that after spending the right amount of time in building y

our shed, you will be able to enjoy it 

for years to come.

Thanks for choosing Sentinel™ Outdoor Storage, and hav

e fun!

Содержание Sentinel 6414













































Отзывы: