Lifetime QUICK ADJUST II 1008, Руководство пользователя с инструкциями по сборке

Страница: 8 / 16

ME
RB
MB
MK
ME
MB
LB
AC
RL
MK
STOP!
Allow the concrete to set for at least 72 hours (3 days) before continuing with the
assembly. In humid climates or wet weather, allow more time for the concrete to
cure. Do not proceed until the curing process is complete.
Do not continue until the concrete has set for 1-4
hours.
Remove the straight object from the top of the pole.
.JYUIFSFNBJOJOHCBHPGDPODSFUFBOEQPVSUIFDPODSFUFJOUPUIF
Bottom Pole until it is just below the slots in the top of the pole.
Do not overfill the pole or you may not be able to assemble the rest of the
pole sections.
Tamp the concrete down in the Bottom Pole with a broom
handle to remove any air pockets.
$MFBOBMMFYDFTTDPODSFUFPGGUIFPVUTJEFTVSGBDFPGUIFQPMF
LB
RB
RL
7
MB
ME
MK
))#
(2)
(2)
(2)
w8SFODIFT
Required For This
Page:
5
1MBDFUIFwYSFCBS OPUJODMVEFEJOTJEF
the Bottom Pole (BP).
Check the pole several times in the first hour to make sure
the sides are vertical and that the pole does not sink into
UIFDPODSFUF5IFwNBSLNVTUSFNBJOMFWFMXJUIUIF
playing surface.
Fold up the sides of the
Inner Guard (AC).
Ensure U-Bolt (RL)
rests in the notches.
Completely tighten the
Nuts (MB).
Rebar
Allow 1-4 hours for the concrete to set.
AC
Insert Inner Guard
between Backboard
Brackets (LB & RB)