Lifetime QUICK ADJUST II 1008, Руководство пользователя с инструкциями по сборке

Страница: 14 / 16

Insert two self-tapping screws (PB)
into the back of the pole at the
locations shown.
Make sure the Backboard faces the playing surface and
align the small hole in the Middle Pole with the correct slot
in the Bottom Pole. Slide the Middle Pole (MP) over the Bottom Pole
(BP).
**2 Adults Required For This Step**
19
AA
TP
AK
MP
TP
*OTFSUUIFSFNBJOJOHwYw4DSFX 1"UISPVHIUIFIPMFJO
the Middle Pole and into the Bottom Pole.
The Screw will spin freely once installed.
4USJLFUIF8PPE#MPDL ",POUPQPGUIFQPMFUPUJNFT
If
the Middle Pole does not completely cover the slot on the Bottom Pole
after seating, DO NOT COMPLETE ASSEMBLY, call our Customer Service
Department.
WARNING
MP
To ensure that the concrete can fully
set, do not play aggressively on your
basketball system for a week.
BP
Insert the Pole Cap (AA) into the pole.
Required For This
Page:
PA (1)
Screwdriver
PB (2)
Note: There are two screw
holes at the bottom of the
pole. The correct hole
will be slightly larger and
slightly lower on the pole.
The poles must be seated together!! Even if the poles cover the slots before
TFBUJOHZPVNVTUTUSJLFUIFNIBSEPOUIFXPPEmWFUPTJYUJNFT'BJMVSFUPTFBU
the poles correctly could allow the poles to separate during use, which could
lead to serious personal injuries or property damage as listed on Page Two.
20
PB
TIP: Chuck the Screw (PB) directly into an electric
drill for easiest installation.
Electric Drill
PA