Lifetime QUICK ADJUST II 1008, Руководство пользователя с инструкциями по сборке

Страница: 6 / 16

PRODUCT DESCRIPTION MODEL #
Universal Ground Sleeve 0023
ACCESSORIES AVAILABLE FOR MORE BASKETBALL FUN!
T h e U n i v e r s a l G r o u n d
Sleeve enables the pole to
be cemented in, yet still
removable. The sleeve sits
flush with the ground level
BGUFS JOTUBMMBUJPO 'JUT w
diameter poles.
LIFETIME PRODUCTS, INC.
P.O. BOX 160010
BLDG. D-11, FREEPORT CENTER
CLEARFIELD, UT 84016-0010
To place orders, use a Master Card or Visa
and call our Customer Service Department for
prices and freight:
POLE CARE AND SYSTEM MAINTENANCE
5IFMJGFPGZPVSCBTLFUCBMMTZTUFNEFQFOETPONBOZWBSJBCMFT5IFDMJNBUFFYQPTVSFUP
DPSSPTJWFTTVDIBTTBMUQFTUJDJEFTPSIFSCJDJEFTBOEFYDFTTJWFVTFPSNJTVTFDBOBMM
contribute to pole failure, which may cause property damage or personal injury.
$IFDLZPVSCBTLFUCBMMTZTUFNGSFRVFOUMZGPSMPPTFIBSEXBSFFYDFTTJWFXFBSBOETJHOTPG
corrosion. For safety reasons, and to prolong the life of your basketball system, you must
take the following preventive measures.
a. Check all Nuts and Bolts. If any are loose, tighten them.
C$IFDL BMM QBSUT GPS FYDFTTJWF XFBS BOE UFBS *G OFDFTTBSZ SFQMBDF BOZ QBSUT UIBU IBWF
been worn or damaged through usage. Contact our Customer Service Department for
replacement parts.
c. Inspect the Warning Sticker on the pole. If it is ripped, faded, or illegible, call our Customer
Service Department to request a replacement Sticker.
d. Check all pole sections for visible rust or chipped or cracked paint. If either are present,
do the following:
1. Use an emery cloth to completely remove any rust or chipped paint.
2. Clean the area with a damp cloth and allow it to dry.
3. Apply two coats of a rust preventative, high gloss enamel paint to the area. Allow
the paint to dry between coats.
IF RUST HAS PENETRATED THROUGH THE POLE ANYWHERE, REPLACE IT IMMEDIATELY!
BEFORE BEGINNING ASSEMBLY
" *EFOUJGZBOEJOWFOUPSZBMMQBSUTVTJOHUIFDIFDLMJTUCPYFTPOUIF1BSUT-JTU,FFQ
the hardware bags and their contents separate. If any parts are missing, call
our Customer Service Department.
B. Test fit all Bolts by inserting them into their respective holes. If necessary,
DBSFGVMMZTDSBQFBXBZBOZFYDFTTQPXEFSDPBUJOHCVJMEVQGSPNJOTJEFUIFIPMFT
Do not scrape away all of the powder coating. Bare metal may rust. You may
need to pound some Bolts into place with a hammer or mallet.
$ 1VSDIBTFTJYMCCBHTPGDPODSFUFSFBEZNJYBOEBMFOHUIPGSFCBS$IPPTF
the location of your pole carefully! Avoid putting the pole near overhead power or
utility lines. When digging the footing, consider the location of any underground
utilities.