17
TR7000i/TR8000i
Treadmill
4. Install the Left and Right Handlebars
A. Slide the new left handlebar end cap (3) onto the left
handlebar (4) and the right end cap (5) onto the right
handlebar (6). (FIG. 1)
Note:
The new left and right handlebar end caps are included in
the hardware pack. The screw threads in the end cap when installed
on the handlebars should be facing down. If not, the wrong end
cap is on the wrong handlebar.
B. Slide the bottom of the left handlebar (4) up under
the treadmill lower frame and slide the top of the
medical handlebar into the treadmill handlebar
frame. (FIG. 2)
C. Line the holes up in the treadmill handlebar frame
with the threads in the new end caps and loosely
install the two new M6*15 Allen head screws (7).
(FIG 2)
D. Align the holes in the medical handlebar frame with the
threaded holes in the treadmill base frame and loosely
install the two M8*20 bolts (8), two M8 lock washers (9)
and two M8 washers (10). (FIG. 2)
E. Install the two inside frame M8*20 bolts (8),two M8 locks
washers (9) and two M8 washers (10). (FIG. 3)
F. Repeat steps B-E for the right handlebar (6).
G. Tighten all hardware.
6
5
4
3
8
7
9
10
8
8
9
10
10
9
Figure 1
Figure 2
Figure 3
