31
TR7000i/TR8000i
Treadmill
Engineering Mode
Press STOP and then speed up to enter the Engineering Mode. You can press Enter / Mode to switch
setup screens. The table below shows the sequence setup screens.
Engineering Function
Information viewed on screen
Press and hold STOP and then Speed for 3 seconds to enter
Egineering Mode. The first screen show the software versions.
Software Ver.
H = 0010 F = 0109
014 5.06 2.00
Press Enter to set up the units of measurement in metric (SI) or in
English (EN).
Press Speed / Incline UP / DOWN to change.
Select the units EN or SI
Press Enter for pause time
This allows you to set the amount of time the treadmill will be
paused prior to automatically resetting. The choices ar 90,180, or
300 seconds as shown in the time window.
Select the pause time
90, 180, or 300 seconds
Press Enter for Distance
This is the total distance the treadmill has been run in Miles or
Kilometers depending on what mode the treadmills is in.
Total Distance
0 000
Press Enter for Workout Time
This is the total number of hours the treadmill has been used.
Total Hours
0 000
Press Enter again to return to standby mode
TR8000i
Engineering Function
Information viewed on screen
Press and hold STOP and then Speed for 3 seconds to enter
Egineering Mode. The first screen show the software versions.
Engineering Mode
H = 0028 F = 0109
12 12.07 1.00
Press Enter
This for turning the Intelli-Guard on and off. Intelli-Guard
automatically pauses the unit if it detects the treadmill is not being
walked on. Press Speed / Incline UP / DOWN buttons to change
between on and off
Intelli-Guard
On or Off
Press Enter to set up the units of measurement in metric (SI) or in
English (EN).
Press Speed / Incline UP / DOWN to change.
Select the units
EN or SI
Press Enter for pause time
This allows you to set the amount of time the treadmill will be
paused prior to automatically resetting. The choices ar 90,180, or
300 seconds as shown in the time window.
Select the pause time
90, 180, or 300 seconds
Press Enter for Distance
This is the total distance the treadmill has been run in Miles or
Kilometers depending on what mode the treadmills is in.
Total Distance
0 000
Press Enter for Workout Time
This is the total number of hours the treadmill has been used.
Total Hours
0 000
Press Enter again to return to standby mode
TR7000i
