6
• The assembly of the product must be done carefully and by an able-bodied adult. If in any
doubt, ask a technically qualified person.
• Before you start with the assembly, read the instructions carefully.
• Remove all packaging materials and lay down all parts on an open space. This gives you
an overview and simplifies the assembly procedure.
• Check with the parts list that all parts are available. Dispose of the packaging material when
the assembly is completed.
• Beware that when using tools or doing technical work, there is always a risk of injuries.
Assemble the product with care.
• Create a danger free environment; for example, do not let tools lay around the workspace.
Store the packaging material in a way that cannot cause any danger.
• After installing the product according to the instruction manual, en sure all screws, bolts and
nuts are correctly installed and tightened and that all joints are secure.
• Reasonable space must be kept between the product and possible sources of danger, such
as other equipment swimming pools and fences.
• The product must be assembled correctly before use.
• Place the product on a level surface at least 2 m from any structure or obstruction such as a
fence, garage or house.
• Modifications made to the original product shall be carried out according to the instructions
of the manufacturer.
• The product must always be used in a well-lit area.
• Do not place anything under the product.
• Use gloves during assembly and disassembly.
• Outdoor products should be equipped with a device that in strong wind conditions
avoid displacement due to wind (e.g. steel bars in the ground or loads like sand bag or water
bags).
• In certain areas during winter, snow buildup and the low temperatures can damage the
product. It isrecommended to remove snow buildup and to store the product indoor.
• We strongly recommend visual inspections every 3 months to insure the integrity of the
entire product. Replace any parts as necessary.
1.4 ASSEMBLY ADVICE
GENERAL SAFETY INSTRUCTIONS
