background image

3

WARNING!

   

This product must be assembled by an adult.

   

Children must not use the product until properly installed. 

   

Not suitable for children under 3 years.

   

Small parts. Choking Hazard.

   

Max user 2 and Max user weight 50kgs.

   

For outdoor and domestic use only.

   

Maximum fall heights 900mm.

WARNING

1.  The product should be installed over impact absorbing surfaces such as sand, wood-bar chips,
    rubber and foam and should not be installed over concrete, asphalt or any hard surface.

2. Anchors shall be placed level with or under the ground in order to reduce tripping hazards.

3. If these checks are nor carried out, the toy could overturn or otherwise become a hazard. Oil all
    metallic moving parts. Check all overrings and bolts for Sharpe edges and replace when required.
    Check swing seats, chains, ropes, and other means of attachment for evidence of deterioration.
    Replace when required in accordance with the manufacturer’s instructions. Sand rusted areas and
    tubular members and repaint using a non-lead based paint when required.

4. Consumer Information Sheet for Playground Surfacing Materials The US Consumer Product Safety   
    Commission(CPSC) estimates that about 100 000 playground equipment-related injuries resulting
    from falls to the ground surface are treated annually in US hospital emergency rooms. Injuries
    involving this hazard pattern tend to be among the most serious of all playground injuries, and have
    the potential to be fatal, particularly when the injury is to the head. The surface under and around
    playground equipment can be a major factor in determining the injury-causing potential of a fall.
    It is self-evident that a fall on to a shock-absorbing surface is less likely to cause a serious injury
    than a fall onto a hard surface.Playground equipment should never be placed on hard surfaces,
    such as concrete or asphalt, and while grass may appear to be acceptable, it may quickly turn
    to hard-packed earth in areas of high traffic. Shredded bark mulch, wood chips, tine sand or the
    gravel are considered to be acceptable shock absorbing surfaces when installed and maintained
    at a sufficient depth under and around playground equipment. Table B.1 lists the maximum height
    from which a child would not be expected to sustain a life-threatening head injury in a fall on to four
    different loose-fill surfacing materials if they are Installed and maintained at depths of 150mm,
    225mm and 300mm.

Содержание Summit 2m Dome Climber





















Отзывы: