13
ASSEMBLY INSTRUCTIONS
STEP 7 (See diagram 7)
A. Insert 2 barrier frames( #8) into the joints on bracket(#4), ensure the pop-pin in proper position.
B. User the frame (#9) to connect two barrier frames (#8) together, Secure each end with
M8 x 40MM Allen Bolt . Do not fully tighten the Nut and Bolt yet.
C. Now set the entire unit firmly on the ground and align all the frames. Make adjustment if
necessary.
D. You can now securely tighten all Nuts and Bolts previously installed.
DIAGRAM 7
#8
#9
